High Speed Linear Guide HGR25 Motion Systems And Block

Features of HG Series

(1) Self-aligning capability
By design, the circular-arc groove has contact points at 45 degrees. HG series can absorb most installation errors due to surface irregularities and provide smooth linear motion through the elastic deformation of rolling elements and the shift of contact points. self-aligning capability, high accuracy and smooth operation can be obtained with an easy installation.

(2) Interchangeability
Because of precision dimensional control, the dimensional tolerance of HG series can be kept in a reasonable range, which means that any blocks and any rails in a specific series can be used together while maintaining dimensional tolerance. And a retainer is added to prevent the balls from falling out when the blocks are removed from the rail.

(3) High rigidity in all four directions
Because of the four-row design, the HG series linear guideway has equal load ratings in the radial, reverse radial and lateral directions. furthermore, the circular-arc groove provides a wide-contact width between the balls and the groove raceway allowing large permissible loads and high rigidity.

Specifications

1.Accurancy : Grade C;H;P;SP;UP

3.High rigdity and high load,four direction with same load design.

4.Smooth running,low noise and non-pollution

5.With automatic self-aligning capability,keep smooth and stable ,high precision running

6.Has the interchangeability characteristics,assembly and repair the most easily .

7.Length: can be cut to your requirement. 

Application

Electronic equipment, tensile testing machine and the digital three dimensional coordinate measuring equipment,
Precision equipment, and multi-axis machine tools, presses, tool grinder, automatic gas cutting machine,
Printer, card sorting machine, food packing machines and other industrial machinery sliding components

Model series

HGH15CA HGH20CA HGH25CA HGH30CA HGH35CA HGH45CA HGH55CA HGH65CA
HGW15CA HGW20CA HGW25CA HGW30CA HGW35CA HGW45CA HGW55CA HGW65CA
HGH15CC HGH20CC HGH25CC HGH30CC HGH35CC HGH45CC HGH55CC HGH65CC
HGW15CC HGW20CC HGW25CC HGW30CC HGW35CC HGW45CC HGW55CC HGW65CC
HGH20HA HGH25HA HGH30HA HGH35HA HGH45HA HGH55HA HGH65HA
HGW20HC HGW25HC HGW30HC HGW35HC HGW45HC HGW55HC HGW65HC
HGW20HA HGW25HA HGW30HA HGW35HA HGW45HA HGW55HA HGW65HA
EGH15CA EGH20CA EGH25CA EGH30CA EGH15SA EGH20SA EGH25SA EGH30SA
EGW15CA EGW20CA EGW25CA EGW30CA EGW15SA EGW20SA EGW25SA EGW30SA