Jinan Yuki Bearing Co,.Ltd.

Let YUKI Quality Turning the World.
 86-0531-85556568
 yuki@ywsbearing.com
High quality stainless steel or Gcr15 steel male Thread Joint rod end bearing SA10T/K
You are here: Home » Products » Rod End Joint Bearing » High quality stainless steel or Gcr15 steel male Thread Joint rod end bearing SA10T/K

High quality stainless steel or Gcr15 steel male Thread Joint rod end bearing SA10T/K

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
A rod end bearing, also known as a heim joint (N. America) or rose joint (U.K. and elsewhere), is a mechanical articulating joint. Such joints are used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint is required, and where a clevis end(which requires perfect 90 degree alignment between the attached shaft and the second component) is unsuitable. A ball swivel with an opening through which a bolt or other attaching hardware may pass is pressed into a circular casing with a threaded shaft attached. The threaded portion may be either male or female.
  • SA10T/K

  • YWS

  • rod end bearing ball joint bearing

  • YWS

  • 10mm

  • SA10T/K

  • China

  • steel

  • M10*1.5

Availability:

Product Description


Rod end bearings, also called heim joints or spherical rod ends, are articulating joints that are attached to the ends of tie rods, steering links, and cylinders to provide a transfer of motion and force between two points. They consist of a spherical swivel with a cylindrical bore through which a bolt may pass pressed into a housing that has a threaded shank. Rod end bearings are used in applications such as steering linkages, agricultural machinery, and textile manufacturing equipment, and off-road vehicles,among others.

Rod end bearing consist of an eye-shaped head with integral shank forming a housing and a standard spherical plain bearing, or a spherical plain bearing inner ring, or a spherical plain bearing inner ring and a sliding layer between the bore of the head and the inner ring. As a rule, rod ends are available with left or right-hand female or male threads. Rod ends have the sliding contact surface combinations steel-on-steel, steel-on-bronze, steel-on-PTFE composite material, steel-on-PTFE fabric and steel-on-PTFE plastic.

Previous: 
Next: