Jinan Yuki Bearing Co,.Ltd.

Let YUKI Quality Turning the World.
 86-0531-85556568
 yuki@ywsbearing.com
How to store YWS rails without damage or deformation
You are here: Home » News » linear bearings » How to store YWS rails without damage or deformation

How to store YWS rails without damage or deformation

Views: 12     Author: Site Editor     Publish Time: 2019-06-28      Origin: Site

As is well known, the guide rails are precision parts, so care must be taken when using them. In other words, use high performance rails. If used improperly, the expected performance will not be achieved and the rails will be easily damaged. Therefore, the following matters should be noted when using YWS rails:

 

1. Keep the guide rail and its surrounding environment clean. Even if invisible tiny dust enters the rail, it increases the wear, vibration and noise of the rail.

 

2. When using and installing, be careful not to let strong punching, do not hit the rail directly with a hammer, and do not transmit pressure through rolling elements.

 

3. Use appropriate and precise installation tools to avoid the use of fabrics and staple fibers.

 

4. In order to prevent the corrosion of the YWS guide rail, when directly carrying the guide rail by hand, the sweat should be thoroughly cleaned and coated with high quality mineral oil before operation. Special attention should be paid to rust prevention during the rainy season and summer.

 

However, under certain special conditions, the YWS guide has a longer life than conventional calculations, especially at light loads. These special operating conditions are that when the rolling surfaces (tracks and rolling members) are effectively separated by the lubricating oil film, contaminants may cause surface damage. In fact, under ideal conditions, so-called permanent rail life is possible.

 

Grease lubrication has a sealing method in which grease is previously filled in the sealing rail, a proper amount of grease is filled inside the housing, and grease is periodically filled and supplied. In addition, for multi-rail machinery that requires lubrication, a centralized grease supply method in which pipes are connected to various lubrication points is also used. Grease lubrication can not add grease for a long time, and its sealing device structure is relatively simple and widely used. Oil lubrication is relatively simple. Regular lubrication can greatly increase the service life of the YWS rail.

PRODUCT CATEGORY

CONTACT US

  86-531-85556568
  86 18615208797
  yuki@ywsbearing.com
  No. 20 north xinsha road,huaiyin 
district, Jinan,Shandong

CONTACT US

Company Name: Jinan Yuki Bearing Co,.Ltd
Telephone: 86-0531-85556568
Mobile Phone: 86-18615208797
Email: yuki@ywsbearing.com
Address: No. 20 north xinsha road,huaiyin 
district, Jinan,Shandong
Copyright  2013-2022  Jinan Yuki Bearing Co,.Ltd.   Support by sdzhidian