The functions of the linear guide slider

1. High working precision: the movement of the linear guide is realized by rolling. Not only the friction coefficient is reduced to 1/50 of the sliding guide rail, but also the gap between the dynamic and static frictional resistance becomes small, achieving smooth motion, reducing shock and vibration, and not easily generating Crawling phenomenon, so it can achieve UM-level feed and positioning accuracy, which is beneficial to improve the response speed and sensitivity of the numerical control coefficient.

2. Significantly reduce the driving rate: Since the friction of the linear guide is very small, only a small amount of power is required to make the machine move, and the power loss of the machine is obviously large, and the heat generated by the friction is small. It is a moving part for high speed, frequent starting and reversing.

3. The lubrication structure is simple: the linear guide is equipped with an oil-filling cup on the slider, which can directly inject oil into the oil, or can be connected to the oil supply pipe to be lubricated by the automatic oil supply machine, so that the wear is reduced to less, so that the machine can be long Time to keep the master.

4. Dustproof and sealing ability: The linear guide has good dustproof performance. The ends of the slider are equipped with a sealed end cover. The bottom of the slider can be sealed with a negative film. At the same time, the sliding rail fixing screw hole is equipped with a dustproof screw hole cover to prevent dust. Accumulate to ensure product life and performance.

5. Easy to install and easy to interchange: Due to the precise processing technology, the straightness of the slide rail is high, the installation screw hole error in the slide rail is small, the installation is convenient, the linear guide rails are interchangeable, and the slider or the slider can be replaced separately. Even the linear guides allow the machine to regain high precision.