6207-2RS Low Noise Deep Groove Ball Bearing 35×72×17mm

product information:

standard size Deep Groove Ball Bearings 35×72×17mm-6207-2RS

Item: 6207-2RS bearing

Type: Deep Groove Ball Bearings

Material: Chrome Steel or stainless steel

Size：35×72×17mm

Static Load Capacity：15300  kilograms

Dynamic Load Capacity：25700  kilograms

Item Weight：0.288kg

Lubrication: Self Lubricated (Grease) 

Packing:Neutral packing:White plastice bag,outer carton, pallet, tube

Industrial packing, factory packing, or white box

Product description:

Single row radial ball bearings are the most widely used bearings and utilize an uninterrupted raceway, which makes these bearings suitable for radial loads, or a combination of thrust and radial loads. This design permits precision tolerances even at high speed operation. Shielded bearings are protected on one, or both sides (suffixes Z and ZZ, respectively) by metal shields fastened to the outer ring. This close clearance labyrinth seal retains the lubricant and prevents the entrance of foreign matter. Sealed bearings incorporate steel reinforced rubber seals securely fastened to a groove on the outer ring. Contact with the inner ring is by sealing lip (Contact Suffix LLU). Or, non-contact with the inner ring is by labyrinth seal (Non-contact Suffix LLB) to provide positive sealing at all times.

Product features:

Deep groove geometry for high speeds

Single row for supporting radial loads

Steel cage evenly spaces balls for reduced friction, vibration and noise

Non-contact rubber seal on both sides to keep lubricant in and contaminants out

CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision