Hot Sale Pillow Block Bearing NA207

Product information:

product name:pillow block bearing NA207

Brand:YWS

d:35mm

D:72mm

B：51.1mm

C:20mm

weight:0.6kg

material:bearing steel

Product feature:

This product is similar to the UB/UC type. It is fastened to the bearing by means of an eccentric sleeve set screw during installation. Its ability to withstand axial loads is slightly higher than that of the corresponding size UB/UC type bearing.

1. The outer spherical ball bearing with top wire is applied to the through shaft with large difference of rigidity and deflection. The bearing has sealing ring on both sides to prevent the intrusion of dirt. The grease is installed at the factory and does not need to be cleaned before use.

2. The inner ring of the bearing is provided with a set screw, which can directly fix the inner ring of the bearing on the shaft, which is very convenient to install.

3, the bearing has a certain ability to adjust the heart, can be installed in the bearing shell and fixed on the frame, adaptability, wide application

4, the top ribbon has a steel ball, the friction coefficient is small, reduce the damage to the shaft, good shock absorption, release torque