Article List

• Deep groove ball bearing feature

  Deep groove ball bearing is the most common type of rolling bearing. The basic deep groove ball bearings are made of a outer ring, an inner ring, a set of steel balls, and a group of retaining structures. It is simple in structure and convenient in use. It is the most widely used and widely used typ

  Bearings knowledge January 18, 2019
• LMF linear bearing specification

  linear bearings January 16, 2019
• Linear Motion Bearing Features & Applications

  Linear ball bearing is a low cost production of linear motion system, for unlimited travel in conjunction with the cylinder axis. As was carrying the ball point contact with the shaft, so use small loads. Linear bearing with minimal friction ball rotation, so that it can be smooth precision movement

  linear bearings January 16, 2019
• The feature of rod end bearings

  Radial spherical plain bearings have an inner ring with a sphered convex outside diameter and an outer ring with a correspondingly sphered but concave inside surface. Their design makes them particularly suitable for bearing arrangements where alignment movements between shaft and housing have to be

  Bearings knowledge January 16, 2019
• Joint Rod End bearings

  Joint Bearing Joint Rod End bearings Description:Joint bearing is dominated by an inner and outer sphere within a spherical outer ring,can withstand a greater load.According to their different types and structures that can withstand the radial load,axial load or radial,axial joint load.Since the in

  Bearings knowledge January 16, 2019
• Sprag freewheels CSK...P CSK...PP CSK...2RS series one way clutch bearing

  Sprag freewheels CSK CSK...2RS series one way clutch bearing Description Type CSK is sprag type freewheel integrated into a 6200, 600, 6300 series ball bearing(expect sizes 8 and 40). It is bearing supported, delivered grease lubricated and protected against dust of more than 0.3mm. The use of addi

  One way bearing January 15, 2019
• Sprag freewheels CSK CSK...2RS series one way clutch bearing

  Description Type CSK is sprag type freewheel integrated into a 6200, 600, 6300 series ball bearing(expect sizes 8 and 40). It is bearing supported, delivered grease lubricated and protected against dust of more than 0.3mm. The use of additional "nylon" type seals is recommended especially when the

  One way bearing January 12, 2019
• HG series Linear motion guide for cnc machine

  Feature of Linear guide rail Easy lubrication InterchangeabilitySelf-aligning capabilityHigh rigidity,highly accurateHeavy load radial linear guidesSmooth runningHigh speed and accuracyLow friction & vibrationLow noise and non-pollutionAchieve a long life with high speedApplication of Linear guide r

  January 14, 2019
• End support with ball bearing for CNC Router Milling machine

  Smooth OperationThe high efficiency of ball screws is vastly superior to conventional screws. The torque required is less than 30%. Linear motion can be easily changed from rotary motion.High Rigidity and PreloadWhen axial play is minimized in conventional screw-nut assemblies, the actuating torque

  January 14, 2019
• Sliding Rail System Linear Motion bearing

  Product Introduction:1. Linear bearing is a low cost production of linear motion systems, for unlimited travel in conjunction with the cylinder axis. 2. As was carrying the ball with the axis point of contact, so use small loads. 3. Ball rotation with minimal friction , which can get a smooth precis

  January 14, 2019