trust ball bearing 51411

product information:

Structure:thrust ball bearing

Type:thrust ball bearing

Brand Name:YWS

Internal diameter:55mm

External diameter:120mm

Width:48mm

size:55×120×48mm

weight:2.82kg

Maximum Rotational Speed:1800  rpm

Static Load Capacity:80000  pounds

Dynamic Load Capacity:40000  pounds

Material:Chrome steel/GCr15/Stainless steel/ceramic/ZrO2 

Is customized: Yes (Drawings required)

Wholesale and freight: To provide you with accurate solutions

Tips: Please contact us for details of the required products.

Product description：

This single-row thrust ball bearing has grooved raceways, a 90-degree contact angle, a steel cage, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing consists of a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and outer raceway contact points are on a plane parallel to the axial load, which enables the bearing to receive high axial force. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This bearing is separable so it mounts more easily than nonseparable bearings because its components can be installed independently. It can be used at operating temperatures from -30 degrees C to 150 C (-22 degrees F to 302 F). This thrust ball bearing has a PN (normal) tolerance class rating for dimensional accuracy and is suitable for applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.

Product features：

Single direction, deep-groove thrust ball bearing for applications that support heavy axial loads in one direction

Open bearing for lubrication applied in place

Through-hardened chromium steel for durability and resistance to deformity under heavy loads

Sheet steel retainer evenly spaces rollers for reduced friction, vibration, and noise

Grooved raceways for higher speeds and thrust-bearing capacity than flat washers

Sincerely welcome to send enquiry to us!!!