Views: 62 Author: Site Editor Publish Time: 2019-06-12 Origin: Site
According to our survey, some customers report that when using linear guides, because the position of the guide rails is not noticed or accidentally placed, the linear guide rails are prone to bending during transportation or placement. So what should we do if the linear guide is bent?
In fact, many YWS sliders can be corrected in later installations when bending occurs.
When installing the horizontal linear guide, if there is lateral bending, you need to use the wedge to press the linear guide. If the degree of bending is obvious, you need to add a few more wedges. If the degree of bending is very obvious and has already affected the use, it can only be corrected by contacting the manufacturer and handing it over to the manufacturer to avoid damage to the linear guide due to incorrect method of self-correction.
The main points of handling and placing the linear guide slider when the linear guide is improperly placed to cause it to bend:
1. Pay attention to the persistence of the vertical axis, only by the orientation of the slide rail.
2. relying on the elastic force of the spring to store the brakes, relying on the pressure of the air to spread out, to store the brakes of the linear guide track.
3.pay attention to the very urgent time of the suspension.
4. The orientation of the linear guide slider can be fixed by changing the conflict plate.