A, press fitThe inner ring of the bearing is tightly fitted with the shaft. When the outer ring and the bearing housing hole are loosely fitted, the bearing can be pressed on the shaft by the press, and then the shaft is fitted into the bearing housing hole together with the bearing. On the end face
The single row deep groove ball bearing is the most representative structure in the rolling bearing housing and has a wide range of applications. The raceway on the inner and outer rings is a radius cross section slightly larger than the radius of the rolling ball.
Introduction Compared with ordinary bearings, stainless steel bearings not only have obvious advantages in materials, but also have stricter control on precision in process and precision than ordinary bearings. Stainless steel bearings work stably during operation, with low noise, corrosion resis
