Article List

• Joint bearing

  The joint bearing is a special type of plain bearing. It consists mainly of an inner ring with an outer spherical surface and an outer ring with an inner spherical surface. It can withstand large loads. According to its different types and structures, it can withstand radial loads and shafts. Combined load to load or radial and axial simultaneously.

  Joint bearing November 27, 2018
• Skateboard bearings

  Skateboard bearings are not as sophisticated as the yo-yos, because there are eight bearings and four middle locks on one plate, and the best eight replacement bearings are replaced, which is necessary regardless of which axis first explodes.Bearing cleaningThe cleaning of the skateboard bearing is

  November 24, 2018
• 6017 bearing

  6017 bearing size: 85 * 130 * 22mm, inner diameter: 85mm, outer diameter: 130mm, thickness: 22mm. At present, 6017 bearings are widely used in transmission gears, machine tool accessories, distillation equipment, power station boilers, gas valves, extruders, bridges, and automotive lamps.

  Deep groove ball bearing November 22, 2018
• Excavator bearing introduction

  There are many types of excavator bearings. Different types of excavator-specific bearings are used according to different parts of the excavator. The following types of excavator-specific bearings are used:Excavator travel bearing;Excavator slewing bearing;Excavator needle roller bearing;

  Roller bearing November 16, 2018
• Determination of bearing clearance

  The internal clearance of the bearing is the total distance that one of the bearing rings can move in a radial (radial clearance) or axial (axial clearance) relative to the other bearing ring. The clearance of the bearing before installation is the initial clearance.

  Bearings knowledge November 10, 2018
• How to check the Wheel bearing?

  Hub bearings are important moving parts for automobiles. The hub axle bears the burden of reducing the frictional resistance during the operation of the chassis and maintaining the normal driving of the car. If the hub bearing is faulty, it may cause noise, bearing heat, etc., especially the front wheel is more obvious, which may lead to dangerous phenomena such as out of control. Therefore, the hub bearings must be maintained on schedule.

  Roller bearing November 08, 2018
• The role of bearing steel in bearings

  Bearing steel is steel used to make balls, rollers and bearing rings. Bearings are subjected to extreme pressure and friction during operation, so bearing steels are required to have high and uniform hardness and wear resistance, as well as high elastic limits.

  Bearings knowledge November 06, 2018
• What are the advantages and characteristics of ceramic bearings?

  With the development of today's society, the application fields of ceramic bearings are becoming more and more extensive, which has made tremendous contributions to the development of people's life and technology. So do you understand the advantages of ceramic bearings and its own characteristics? The following will take you to the inner world of the ceramic bearings!

  ceramic bearings November 02, 2018
• The role and precautions of tapered roller bearings

  Tapered roller bearings mainly bear radial and axial combined loads. The bearing capacity of the bearing depends on the raceway angle of the outer ring. The larger the angle, the greater the load carrying capacity. This type of bearing is a split type bearing, which is divided into single row, double row and four row tapered roller bearings according to the number of rows of rolling elements in the bearing.

  Roller bearing October 30, 2018
• Yuki Group's growth process

  In 2004, Jinan Xinghui Bearing Co., Ltd. was established. As a project for investment promotion in Jinan, the company has settled in the Entrepreneurship Center for Overseas Students.

  company culture October 16, 2018