Deep groove ball bearing is the most common type of rolling bearing. The basic deep groove ball bearings are made of a outer ring, an inner ring, a set of steel balls, and a group of retaining structures. It is simple in structure and convenient in use. It is the most widely used and widely used typ

Linear ball bearing is a low cost production of linear motion system, for unlimited travel in conjunction with the cylinder axis. As was carrying the ball point contact with the shaft, so use small loads. Linear bearing with minimal friction ball rotation, so that it can be smooth precision movement

Radial spherical plain bearings have an inner ring with a sphered convex outside diameter and an outer ring with a correspondingly sphered but concave inside surface. Their design makes them particularly suitable for bearing arrangements where alignment movements between shaft and housing have to be

Joint Bearing Joint Rod End bearings Description:Joint bearing is dominated by an inner and outer sphere within a spherical outer ring,can withstand a greater load.According to their different types and structures that can withstand the radial load,axial load or radial,axial joint load.Since the in

Sprag freewheels CSK CSK...2RS series one way clutch bearing Description Type CSK is sprag type freewheel integrated into a 6200, 600, 6300 series ball bearing(expect sizes 8 and 40). It is bearing supported, delivered grease lubricated and protected against dust of more than 0.3mm. The use of addi