FeatureHiwin linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove and structure optimization. It features equal load ratings in the radial,reverse radial and lateral directions, and self-aligning to absorb installation-error. Thus,
A, press fitThe inner ring of the bearing is tightly fitted with the shaft. When the outer ring and the bearing housing hole are loosely fitted, the bearing can be pressed on the shaft by the press, and then the shaft is fitted into the bearing housing hole together with the bearing. On the end face
Many people don't know what preparations should be made before installing linear bearings. What should be paid attention to during installation and use? Here are six steps to introduce linear bearing installation.
Bolt type curved roller bearing The bolt-type curved roller is generally a full-loaded roller structure, and the bolt shaft raceway portion is quenched. To avoid stress concentration, the outer surface of the thick-walled outer ring of the roller is curved. The outer ring has two integral ribs that
A rod end bearing, also known as a heim joint (N. America) or rose joint (U.K. and elsewhere), is a mechanical articulating joint. Such joints are used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint is required, and where a clevis end (which require
